TFS Tube Flaring Tools for Bead Spacers

Be the first to review this product

$175.00
OR

TFS   Tube Flaring Tools for Bead Spacers

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

Tube Flaring Tools for Bead Spacers

 

 

The Tube Flaring Tools are made up of four parts.  There are three split Tube Flaring Mandrels, TFM-1, TFM-2 and TFM-3 for holding cut pieces of tubing of various sizes.

The mandrels are held upright in the Tube Flaring Base, TFB-1 to make the flaring process accurate and easy.

An annealed cut piece of seamless tubing is placed between the two parts of a split mandrel and flared by striking with a stamping hammer.  Many variations are possible by changing the length, width and gauge of the tubing, and then texturing with hammers if desired.

It is important to use the largest size split mandrel possible with the chosen tubing diameter.

The size range of sterling tubing to be used is 3.5-7mm inside diameter with this set.

 

The set includes:

 

 An Wood Holder

TFM-1 for Tubing with an Inside Diameter of 3.5mm 4.4mm

TFM-2 for Tubing with an Inside Diameter of 4.5mm-5.9mm

TFM-3 for Tubing with an Inside Diameter of 6mm-7mm

TFB-1  Tube Flaring Base

 

For Instruction Please Visit Our Articles

 

Additional Information

Face sizes No
Head length No
Handle length No
Type No
Image Gallery N/A
Country of Manufacture

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.